Schools

Mechanical Engineering Faculty Back

Dr. P. Mathiyalaganr

Professor

E-mail

p.mathiyalagan@galgotiasuniversity.edu.in

Website

http://www.galgotiasuniversity.edu.in

Education

Ph.D. in Production Engineering (NIT, Trichy, INDIA); M. E. in Computer Aided Design (Satyabhama University, Chennai, , INDIA) and B.Tech in Production Engineering (Anna University, Chennai,, INDIA)

Research Area

Optimization Techniques , Operation Management, FEM etc.

Professional Experience

Total Experience = 22 years 6 months (Teaching Experience: 20 years 2 months, Research Experience: 2 years 4 months)

Subjects Taught

Engineering Graphics, Manufacturing Technology (I & II),Non Traditional Machining Process, Supply Chain Management, Statistical Quality Control, Operation Research, Production Management, Thermodynamics, CAD,CAM, Quantitative Techniques, Machine design, Operations and Planning Control, Mechatronics systems, Machining processes and Metrology.

Major Publications
[Last 5 years; 2011-2015]
International Journals

  • P. Mathiyalagan. , P. Parthiban., and M. Punniyamoorthy., 2011, “A strategic model using structural equation modeling (SEM) and fuzzy logic in supplier selection”, Expert systems with Applications: An International Journal, 38, pp.1.
  • P. Mathiyalagan. , P. Parthiban., and M. Punniyamoorthy.,2012, “A Combined application of structural equation modeling (SEM) and analytic hierarchy process (AHP) in supplier selection”, Benchmarking: an International Journal,19, pp.1.
  • R. Mariappan., R. Tamilselvan., P. Mathiyalagan., and S. Kumaran.,2013, “Forging and Sintered characteristics of Duplex stainless steels prepared from 316 L and 430 L powders”, International Journal of Metallurgical & Materials science And Engineering, 3, pp.2.
  • S.Gowthaman., K. Shivakumar., and P. Mathiyalagan. ,2013, “End-Potting Concept for Compression Testing of open-cell Carbon Foams”, Experimental Techniques , Society for Experimental Mechanics, 1, pp 1-10 .
  • M.Venkatasudhahar ., N.Dilipraja .,and P.Mathiyalagan .,2014, “Finite Element Analysis of Fatigue Life of Spot Welded Joint and the Influence of Sheet Thickness and Spot Diameter”, International Journal of Mechanical & Mechatronics Engineering,14, pp. 6.
  • S.Muthu kumar., P.Mathiyalagan., and G. Hemath kumar.,2014, “Characterizing the dry sliding friction and wear behavior of al-sicp composite” International Journal of Applied Engineering Research, 9, pp. 24.
  • S. Muthukumar., P. Mathiyalagan., and R. Mariappan.,2014, “Dry Sliding Wear and Friction of Aluminium Alloy Silicon Carbide Particulates Reinforced Composites”, International Journal of Vehicle Structures & Systems, 6(3),pp 82-87.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2014, “Performance Evaluation in Supply Chain Using Balanced Scorecard”, International Journal of Advances in Mechanical & Automobile Engineering, 1, pp.1.
  • M. Amala Justus Selvam., R. Velu., and P. Mathiyalagan.,2015, “Performance Analysis of R410A In lieu of Ammonia in milk chilling plant employed with plate heat exchanger”, International Journal of Applied Engineering Research, 10, pp.3.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2015,“Applying Fuzzy Analytic Hierarchy Process to Rank the Influencing factor of blood bank supply chain”, IOSRD International Journal of Engineering, 2, pp.1.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2014,“Use Of Vikor And Fuzzy Vikor Techniques To Rank The Alternatives (Influencing Factors) Of Blood Bank Supply Chain”, IEEE XPLORER, pp 1-4.
  • M.S. Kumaravel., N. Alagumurthi., and P.Mathiyalagan.,2015, “Development of aluminium-silica sand metal matrix composite and its improved hardness”, International Journal of Applied Engineering Research,10, PP. 12.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2015, “Use of TOPSIS Techniques for Selection of Best Alternatives of Blood Bank Supply Chain”, International Journal of Applied Engineering Research,10, PP. 50.
  • J.M.Babu and P.Mathiyalagan,2015, “Increasing the Efficiency of the Diesel Engine by changing the pressure of Injection pump with alternative fuel Hydrogen oxygen”, International Journal of Applied Engineering Research, 10, PP. 50.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2015, “Applying Interpretive Structural Modeling (ISM) to rank the influencing factor of blood bank supply chain”, International Journal of Applied Engineering Research, 10, pp. 50.
  • P. Mathiyalagan., and M.S. Kumaravel.,2015, “Review: Cerium Oxide nano particles in Engineering, biology and medicine, Improvisation of coconut coir reinforced epoxy fibre composite materials, Accepted International Journal of Applied Engineering Research, 10,pp. 14
  • S. Muthukumar., and P. Mathiyalagan.,2015,“Optimization of Spindle Speed and Feed Rate for Drilling of Al-SiCp Metal Matrix Composites using ANOVA and Genetic Algorithm”, International Journal of Vehicle Structures & Systems, 7, pp. 2
  • P. Mathiyalagan., and M.S. Kumaravel., 2015,“Evaluation of Wear Behavior of AL-Sicp Composite Under dry Sliding wear Tests, International Journal of Applied Engineering Research,10, pp.61.

International Conferences

  • An Analysis on performance management in IT sectors” Proceedings of the International Conference on “Competency Building Strategies in Business and Technology for Sustainable Development”, Sri Sai Ram Engineering college, Chennai in association with Asian Management Science Association (AMSA), September, 22nd & 23rd, 2011.
  • “Impact of ERP Packages in the Organization” Proceedings of the International Conference on “Competency Building Strategies in Business and Technology for Sustainable Development”, Sri Sai Ram Engineering college, Chennai in association with Asian Management Science Association (AMSA), September, 22nd & 23rd, 2011.
  • "Performance analysis of supply chain network using a genetic algorithm and simulation" Proceedings of the International Conference on “Challenges of Indian Business in Global Economy”, Annai Mathammal Sheela Engineering College, September, 23rd, 2011.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan., 2013,“Performance Evaluation in Supply Chain Using Balanced Scorecard” Proceedings of the International Conference on “Research in Science, Engineering and Technology , Organized by International Institute of Engineers, Malaysia, KualaLumbur ,ISBN:978-93-82242-47-5
  • “The effect of injection pressure on engine performance while the engine is running on electrolytically generated hydrogen oxygen mixture” Proceedings of the International Conference on “Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering I-DAD 2014), Organized by VelTech Technical University ,Chennai and supported by DST & DRDO, Govt. of India , ,February 22nd - 24th , 2014,.ISBN:978-93-82242-47-5
  • Improved Methods for Thermal and Compression Testing of Carbon Foams, Proceedings of the International Conference on “Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering I-DAD 2014), Organized by VelTech Technical University ,Chennai and supported by DST & DRDO, Govt. of India , ,February 22nd - 24th , 2014,.ISBN:978-93-82242-47-5
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2014, “Use Of Vikor And Fuzzy Vikor Techniques To Rank The Alternatives (Influencing Factors) Of Blood Bank Supply Chain”, IEEE Proceedings of the International Conference, on Science, & Management Research Organized by ,VelTech MultiTech Engineering College,, Avadi, Chennai.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2014, “A Fuzzy Dematel Approach For The Optimization Blood Banks” Proceedings of the International Conference on “Advances in Design & Manufacturing, Organized by Department of Mechanical & Production Engineering, National Institute of Technology, Tiruchirapalli. ISBN:978-93-84743-14-7
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2014, “Optimization Of Public Blood Supply Chain – A Dematel Approach” Proceedings of the International Conference on “Advances in Design & Manufacturing ,Organized by Department of Mechanical & Production Engineering National Institute of Technology, Tiruchirapalli, ISBN:978-93-84743-14-7
  • Effect of Sintering Atmosphere and Solution Treatment on Density, Microstructure and Tensile Properties of Duplex Stainless Steels Developed from Pre-Alloyed Powders Proceedings of the International Conference on “Advances in Design & Manufacturing (ICAD&M'14)”,Organized by Department of Mechanical & Production Engineering National Institute of Technology, Tiruchirapalli, December 5 -7 ,2014. ISBN:978-93-84743-14-7
  • Transformations in Engineering Education 2015 , International Conference on “Transformations in Engineering Education 2015”, Organized by IUCEE (Indo US Collaboration for Engineering Education) and BMS College of Engineering, Bangalore, January 6 -8, 2015.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2015, “Use of fuzzy TOPSIS techniques for selection of best alternatives of blood bank supply chain ”IEEE International Conference on “Smart Technologies and Management for Computing, Communication, Controls, Energy and Materials”, Organized by Vel Tech University, Chennai in association with Oklahoma University, USA.

National Conferences

  • “Optimization of production-distribution inventory levels & routing structure in a stage supply chain using genetic algorithms‘’ Proceedings of the National Conference on “Recent Trends in Civil & Mechanical Engineering”, Anna University of Technology, Tiruchirapalli, April, on 8th and 9th , 2011.
  • “An Analytic approaches for the evaluation of ERP and Supply chain alternatives‘’ Proceedings of the National Conference on “Recent Trends in Civil & Mechanical Engineering”, Anna University of Technology, Tiruchirapalli, April, on 8th and 9th , 2011.
  • “Accomplishments of Sustainable Manufacturing by Machining Process‘’ Proceedings of the National Conference on “Engineering Approach for Sustainable Development”-STEPMACC, Anna University of Technology, Tiruchirapalli, September on 27th , 2011.
  • “Analytic Network Process for Supplier Selection” Proceedings of the National Conference on “Engineering Approach for Sustainable Development”-STEPMACC, Anna University of Technology, Tiruchirapalli, September on 27th, 2011.
  • “Effect of Sintering Atmosphere and Chemical Composition on Densification and Microstructure of Sintered Duplex Stainless Steels” Proceedings of the National Conference on “Optimization Techniques in Engineering Sciences and Technologies" (OPTEST-2013)”, Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam- 638 401, Erode District, Tamilnadu, April, on 05, 2013.
  • Corrosion Properties of Sintered Powder Metallurgy Stainless Steels Proceedings of the National Conference on Corrosion, Surface Engineering & Tribology (CST 2013), Centre of Excellence in Corrosion and Surface Engineering (CECASE), National Institute of Technology, Tiruchirapalli. April 22-23, 2013
  • Modeling and Optimizing a Multi-Modal Distribution System using Artificial Intelligence Heuristics Proceedings of National Conference, on “Innovations in Machinery and Structures INOMAS’13 ” 30th September, 2013.VelTech,Avadi,, Chennai, India.
  • Natural Fibre Sandwich Composite Panels-Analysis, Testing and Characterization Proceedings of AICTE Sponsored National Conference, on “Advances in Next Generation Materials (NxGn-M) November 07-08, 2013., Department of Materials Science and Engineering ,CARE Group of Institutions, Tiruchirapalli, India
  • Artificial Intelligence Heuristics For Modeling And Optimizing a Multi-Model Distribution with empty contained distribution-A Case Study Proceedings of National Conference, on “Modeling, Simulation and optimization” Organized by the Department of Mechanical Engineering ,Vels University, on 9th November 2013,,4
  • “Effect of Sintering Temperature on Densification, Microstructure and Mechanical Properties of Powder Metallurgy 316 Stainless Steels” Proceedings of National Conference, on “Modeling, Simulation and optimization” Organized by the Department of Mechanical Engineering ,Vels University, on 9th November 2013, ,ISBN 978-81-909042-5-4
  • Automatic Identification Gear Position System with Electronic Controlled Method Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2014) Organized by the School of Mechanical ,VelTech University, Avadi, Chennai on 5th - 6th March, 2014, ,ISBN 978-93-82570-24-0
  • Design Optimization for Sandwich Composite Plate Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2014) Organized by the School of Mechanical ,VelTech University, Avadi, Chennai on 5th - 6th March, 2014, ,ISBN 978-93-82570-24-0
  • Hydrogen Fuel-A Boon for Future Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2014) Organized by the School of Mechanical and Construction Engineering, VelTech University, Avadi, Chennai on 5th - 6th March, 2014, ,ISBN 978-93-82570-24-0
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2014, “Applying Fuzzy Analytic Hierarchy Process to Rank the Influencing factor of blood bank supply chain”, Proceedings of National Conference, on Advances and Innovations in Civil and Mechanical Engineering Organized by Department of Mechanical Engineering and Civil Engineering ,VelTech High Tech Engineering College,, Avadi, Chennai, in Association with IOSR Journals, International Organization of Scientific Research, ISBN 978-93-82570-24-0
  • A Review on Development of Aluminium Metal Matrix Composites with Silica sand as Reinforcement Proceedings of National Conference, on Emerging Technologies in Aerospace Applications (ETAA-2015) Organized by Satyabhama University, Chennai on Apr 10, 11-2015.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2015, “TOPSIS Techniques for Selection of Best Alternatives of Blood Bank Supply Chain”, Proceedings of National Conference, on Advancements in Mechanical, Environmental, Safety and Health Engineering Organized by Department of Mechanical Engineering, Knowledge Institute of Technology, Salem.
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2015, “Applying Interpretive Structural Modeling (ISM) to rank the influencing factor of blood bank supply chain”’ Proceedings of National Conference, on Advancements in Mechanical, Environmental, Safety and Health Engineering Organized by Department of Mechanical Engineering, Knowledge Institute of Technology, Salem.
  • Increasing the Efficiency of the Diesel Engine by Changing the pressure of Injection pump with an alternative fuel Hydrogen oxygen Proceedings of National Conference, on Advancements in Mechanical, Environmental, Safety and Health Engineering (AMESHE 2015) Organized by Department of Mechanical Engineering, Knowledge Institute of Technology, Salem on May 09, 2015
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2015, “Use of Analytical Network Process (ANP) for Selection of Best Alternatives of Blood Bank Supply Chain”’ Proceedings of National Conference, on Computing, Communication and Energy Engineering Organized by School of Electrical and Computing Vel Tech University, Avadi, Chennai.
  • Effect of Injection Pressure on Performance of Engine-Dual Fuel Mode ,Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2015) Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August, 2015, ,ISBN 978-93-82570-65-3
  • Hydrogen Charged Ci Engine with Varying Injection Pressure ,Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2015) Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August, 2015, ,ISBN 978-93-82570-65-3
  • Experimental Study of Tribological and Mechanical Characteristics of Carbon-Epoxy with Ceramic Particles Composites for Centrifugal Pump Bearing Application, Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2015) Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August, 2015, ISBN 978-93-82570-65-3
  • A Review on Mechanical Attributes of Composites Materials, Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2015) Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August, 2015,ISBN 978-93-82570-65-3
  • Concept of Sliding Alignment System for Power Transmission Replacing the use of Bevel gears, Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2015) Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August, 2015,ISBN 978-93-82570-65-3
  • Design and Analysis of Disc Brake using Ansys, Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2015) Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August, 2015,ISBN 978-93-82570-65-3
  • P. Mathiyalagan., P. Parthiban., and K TamilMannan.,2015, “Use of Interpretive Structural Modeling Techniques for Selection of Best Alternative of Blood Bank Supply Chain”, Proceedings of National Conference on Design, Materials and Constructions Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai, ISBN 978-93-82570-65-3
  • Study the Mechanical Properties of Hybrid Polymer Matrix Composites with Alumina and Silicon Carbide Particles, Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2015) Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August, 2015,ISBN 978-93-82570-65-3
  • A Complete Review on Synergetic Effect of LDH with Glass Fibre Composites, Proceedings of National Conference, on “Design, Materials and Constructions” (NCDMC-2015) Organized by the School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August, 2015, ISBN 978-93-82570-65-3
  • Mechanical Characterization Of Polymer Matrix Composite For Foot Rest In Automotive Brake Pedals, Proceedings of Technological Advances in Mechanical Engineering (TAME 2015) Organized By Department of Mechanical Engineering, Vel Tech High Tech Dr.Rangarajan Dr.Sakunthala Engineering College, Chennai In Association with International Organization of Scientific Research and Development and American-Eurasian Network for Scientific Information (AENSI) on August 20, 2015 Books
  • P.Mathiyalagan., and M.S Kumaravel.,2015, “Engineering Mechanics”, SCM Publications (2ndEdn.), Tamilnadu, India
  • P.Mathiyalagan., and M.S Kumaravel.,2015, “Basic civil and mechanical engineering”, SCM Publications (2ndEdn.), Tamilnadu, India
  • Mylsamy., P.Mathiyalagan., and Wickert.,2015, “Basic Mechanical Engineering”, CENGAGE Publications , New Delhi, India Book Chapters
  • P.Mathiyalagan., and D.Seliyan.,2012, “A unified and comprehensive approach of Developing and Testing the Instrument tool on Supplier selection, Supply effort management and Organizational performance by using first order measurement model” as a book chapter for the book entitled “Advanced Statistical Data Analysis for Business Intelligence.”, SCITECH publications, INDIA.
  • S.Gowthaman., and P. Mathiyalagan. ,2014 “Improved Methods for Thermal and Compression Testing of Carbon Foams” as a book chapter for the book entitled “Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering”, Springer Science & Business
  • J.M.Babu., and P.Mathiyalagan., 2014,“The effect of injection pressure on engine performance while the engine is running on electrolytically generated hydrogen oxygen mixture” as a book chapter for the book entitled “Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering”, Springer Science & Business.

Patent Applied

  • Cycle time Reduction in Assembly Process by Introduction of Self –Tapping Bolt.
  • Low Cost Data Acquisition System For CNC Machines

Conference/ Events Organized

  • Organized Two days workshop on “CNC Programming and ANSYS Practice, Chennai, August 08, 2013.
  • Organized One day Seminar on “Capabilities of grid generation software- Hyper mesh and its usage in aeronautical and mechanical applications”, August 10, 2013.
  • Organized One day workshop on “Under Actuated Robotic Systems and Control” Chennai, August 17, 2013.
  • Organized Two days workshop on “Advance Trends in Automobiles”, Chennai, Sep 19, 2013.
  • Organized Mega Blood Donation Camp in association with Lions Club, Chennai, Chennai, Sep 30, 2013.
  • Organized Faculty Development Programme on “Advanced CNC programming in Turning and Machining Centers”, Chennai, Nov 19, 2013.
  • Organized One day Seminar on “Automotive Technology”, Dec 19, 2013.
  • Organized Two days workshop on “Advanced Sensors and Actuators”, Chennai, Dec 23-24, 2013.
  • Advisory Committee and Organized International Conference on “Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering (I-DAD 2014), at VelTech Technical University ,Chennai and supported by DST & DRDO, Govt. of India ,February 22nd - 24th , 2014,.ISBN:978-93-82242-47-5
  • Convener and Organized National Conference, on “Design, Materials and Constructions”(NCDMC-2014) at School of Mechanical , VelTech University, Avadi, Chennai on 5th - 6th March, 2014, ISBN 978-93-82570-24-0
  • Organized Two days workshop on “Recent Advancement in IC engines” ,Chennai, Feb 06-07, 2014.
  • Technical Committee , International Conference on “Advanced Engineering Technologies (AET-2014), at Dubai (UAE), and supported by Universal Researchers (UR) and International Institute of Science Engineering & Management (IISEM). URENG, URCAE, and IISEM, Dec. 25-26, 2014. ISBN 978-93-84468-11-8
  • Convener and Organized National Conference, on “Design, Materials and Constructions”(NCDMC-2015) at School of Mechanical and Construction Engineering , VelTech University, Avadi, Chennai on 20th – 22nd August , 2015, ISBN 978-93-82570-65-3

Participation at Various National/International Conferences / Seminars / Workshop / Short Term Course.

  • Participated in the Faculty Development Programme on “ Meta-Heuristics and its Applications”, organized by the Department of Mechanical Engineering, Vickram College of Engineering , 27-28, May, 2011
  • Presented a paper entitled “End –To-End Messaging Security In Mobile Telecommunication Networks using Identity -Based Crytograpy”, in the AICTE Sponsored National Seminar on “Trends and Challenges in Computational Research” organized by the Department of Computer science, Vivekananda institute of information and Technology, 14th -15th July,2011
  • Participated in Ministry of New and Renewable energy ,New Delhi Sponsored one day seminar on “Renewable energy sources for sustainable development” organized by the Department of Mechanical Engineering, Oxford engineering College, Tiruchirapalli held on 7th July ,2011
  • Participated in the two days National workshop entitled “Statistical Analysis and Structural Equation Modeling using SPSS and AMOS” organized by Saveetha Engineering College, Chennai on 28th and 29th May 2013.
  • Participated in the One day Training Proramme on “ Advanced Manufacturing Techniques” Organized by Academic Staff College, VelTech University, held on 27-04-2013
  • Participated in the Faculty Development Proramme on “ Advanced CNC Programming in Turning and Maching Centers” Organized by Academic Staff College, VelTech University, held on 19-11-2013 and 20-11-2013
  • Participated in the short term course on “Design and Optimization of Production Management Systems” organized by the Department of Production Engineering, National Institute of Technology, Tiruchirapalli during 3rd June to 8th,June 2013.
  • Participated in the TEQIP Sponsored Short Term Course on “Surface Engineering for Tribological Applications” organized by the Department of Production Engineering, National Institute of Technology, Tiruchirapalli during 10th to 13th June, 2013.
  • Participated in the Faculty Development Programme on “Design of Machine Elements” Sponsored by Center for Faculty Development, Anna University, Chennai and organized by the Department of Mechanical Engineering, Vel Tech Multi Tech Engineering College ,Avadi, Chennai during 05-05-2013 to 12-05- 2013.
  • Participated in the One day Seminar on “Resources of Scopus in Library Services” Organized by VelTech University, Department of Library Science. Chennai held on 04-02-2014
  • Participated in the One day Seminar on “Users Awareness Programme on Springer” Organized by VelTech University, Department of Library Science. Chennai held on 22,,December ,2014
  • Participated in the Faculty Development Programme on “Soft Skills Development” Organized by the Department of Mechanical Engineering, School of Mechanical and Construction Engineering, VelTech University ,Avadi, Chennai during 29-30,December, 2014
  • Participated in the Faculty Development Programme on “Recent Advances in Manufacturing (RAM) Organized by the Department of Mechanical Engineering, School of Mechanical and Construction Engineering, VTU ,Avadi, Chennai during 20-21,Apri, 2015
  • Participated in the Technical seminar on CNC/DNC/FMS Automation at VTU, Avadi, Chennai held on 30-04-2015.

Awards & Honors

  • Received Best Research Paper Award in International Conference on “Research in Science, Engineering and Technology (ICRSET-2013), Paper Titled on “Performance Evaluation in Supply Chain Using Balanced Scorecard” at Malaysia, 2014.
  • Received Creative Technology Prize/Award in International Students Green Car Competition (Hybrid Car Category)at International Students Green Car competition Hybrid car category-Organized by Korea Automobile Testing & Research Institute (KATRI), Korea transportation safety Authority(KS) , South Korea,2015.
  • Received Academic Excellence Award for 100 Percent Result in Vel Tech University (2013,2014).
  • International Member of Editorial Board, International Institute of Science Engineering & Management
  • Chief Editor in International Journal of Sustainable Materials ,Design and Manufacturing (IJSMDM)
  • Reviewer in European Journal of Operations Research, Expert System with Applications, Bench Marking: An International Journal, International Logistics Research and Applications & International Journal of Sustainable Engineering.
  • Life member, Indian Society for Technical Education, India.
  • Member, International Association of Engineers (Hong Kong).
  • Fellow, The Institution of Engineers (India)
  • Life Member, International Association of Computer Science and Information technology.
  • Member, International Association for engineering and Management Education
  • Senior Member, Institute of Research Engineers and Doctors
  • Member- Board of Management ,Academic Council member ,Planning and Monitoring board, Financial Committee, Anti-Ragging Committee, , Grievance Redressal Committee during 2013-14 & 2014-15, VelTech Technical University. Avadi, Chennai.
  • Chairman- Board of Studies, School Research Committee, Mechanical stream-panel of Jury during 2013-14 & 2014-15, VelTech Technical University, Avadi, Chennai.

Quick Links

Admissions

Programs

Media

Contact Us

Plot No. 2, Sector-17A, Yamuna Expressway,
Greater Noida, Gautam buddh Nagar,
Uttar Pradesh, India Contact no. 0120–4370000 ,
+91 9582847072 , 9810162221
Email: admissions@galgotiasuniversity.edu.in

Connect With Us

© Copyright 2015, All Rights Reserved with Galgotias University
Design & Development By: Cross Section
Top